CLARO Bar Table 90cm - Oak

A drop leaf bar table at 90cm high, for rooms that do not have space for a permanent dining table. Closed it is an 80cm square that sits against a wall or in a corner. Two 30cm leaves lift on either side and take it out to 140cm, then fold back down when the meal is over.

At 90cm it sits lower than a standard bar table, so it takes a 63.5cm seat height stool rather than a tall bar stool, and it works as an everyday table rather than somewhere to perch.

The top is ash veneer over MDF at 18mm, on splayed Malaysian oak legs. The leaf mechanism is hidden under the top and the hinges sit flush, so the table reads as one piece whether it is open or closed.

Key Features:

• 90cm high, takes a 63.5cm seat height stool
• Opens from 80cm square to 140cm wide
• Two 30cm drop leaves, one on each side
• 18mm ash veneer top on Malaysian oak legs
• Splayed legs for leg room at the table
• Holds up to 50kg
• Pairs with the GITA stool

Specifications:

• Body: MDF with Ash Veneer
• Legs: Malaysian Oak
• Colour: Natural
• Table Top Thickness: 18mm
• Drop Leaves: 2 x 300mm
• Maximum Load: 50kg

Product Dimensions (cm):

• Closed: 80(L) x 80(W) x 90(H)
• Open: 140(L) x 80(W) x 90(H)
• Underside clearance: 82.5(H)
• Leg spread: 68cm

Packaging Dimensions (cm):

• Box 1: 143(L) x 83(D) x 9.5(H) - 27.90Kg
• 1 carton per table, 0.11 M3

Assembly Required:

• Attach Legs Only - Level 1 (refer to Assembly tab for further details)

Maintenance:

• Light dusting/wiping for general cleaning
• Keep away from Direct Sunlight
• Fold the leaves down when the table is not in use to take the load off the hinges

Please Note: Due to the nature of the materials, the grain and colour may vary to maintain a natural aesthetic.

Assembly Requirements

We want to assist our customers as much as we can. In order to give the best recommendation for a smooth and successful assembly of our furniture, we have introduced a grading system to differentiate the different levels of assembly experience and requirements for the product.

Please refer to product specifications for the assembly requirements in product description for level status recommended for each product.
Please note, the below is a guide only and may vary depending on individual assembly ability:

No assembly required: Item fully assembled

Item will come packaged fully assembled, ready to pull out of box and ready to use.
NOTE: In some cases, doors may require minor adjustments/ alignment due to movement during transit.

Level 1: Legs only

Item will arrive predominantly assembly and/or only require attachment of legs. Legs are either installed using the bolts and Allen key supplied or the self-tapping screws supplied.   

Level 2: Basic. Flat packed

Item is a complete flat packed. Basic assembly is required, such as attaching compartments etc. (a simple step by step manual included in packaging).

Level 3: Intermediate. Flat packed

Item is flat packed and requires intermediate level of knowledge. With the aid and guidance of a multiple step by step manual (included in packaging), you are required to complete assembly accordingly. 

Level 4: Experienced

Item is flat packed and detailed, and may require professional assembly. Such items may require you to follow a number of detailed steps, assemble and install drawers and runners, handle and align large parts and adjusting doors and hinges.

While most customers are able to manage a Level 4 assembly item successfully, we do recommend professional assembly to ensure an accurate outcome.  

We always recommend the use of a Licensed Electrician for the installation of any power points.